Here is our brief guide to installing a wire-free kerui alarm, to protect your home or your office and help you feel secure.
Please follow the kerui manufacturer's instructions for the alarm you're installing in the following:
What You Need:
Safety goggles
Wood drill bits
Drills
Tape measure
Spirit level
Screwdriver
Yale Standard Alarm Kit (Wireless)
OR
Electric Screwdriver
Step 1. Check your kit
Check you��ve got all the kit you need: a control panel, a siren (alarm box), PIR detectors and door and window contacts.
Check your kerui package kit
Step 2. Activate the batteries
Before you mount or programme the alarm system, activate the batteries in the sensors.
Check the batteries
Step 3. Power up the kerui control panel
Power up the control panel by plugging in the power adapter. Also activate the back-up battery if your system has one.
Power up the control
Step 4. Programme your system
You can now programme your system and synchronise the sensors and alarms with the control panel. For details, see the manufacturer��s instructions.
Programme your system
Step 5. Disable the control panel tamper
Disable the control panel tamper so you don��t activate the siren, before physically installing any devices.
Disable the control panel
Step 6. Position the kerui control panel
Place the control panel where you��ll be installing it. Put the system into ��test mode��.
Position the control panel
Step 7. Position the sensors
Now take each sensor to its intended location. Do a radio test to make sure it��s within range of the control panel. If the control panel doesn��t respond it may be a range problem, so you��ll need to find alternative locations or move the devices closer together. When you��re happy everything��s in range, mount the control panel.
Position the sensors
Step 8. Mount the kerui alarm box
Mount the alarm box in an obvious location on an outside wall. It should be as high as possible, with the tamper switch fully engaged.
Mount the alarm box
Step 9. Fix the PR detectors
Now you can fix PIR detectors and door and window contacts in their locations. Once you��ve installed everything, reactivate the system tamper.
